adt-run(1)
NAME
adt-run - test an installed binary package using the source package's
tests
SYNOPSIS
adt-run options... --- virt-server [virt-server-arg...]
DESCRIPTION
adt-run is the program for invoking the autopkgtest package testing
machinery.
autopkgtest is a facility for testing binary Debian or Click packages,
as installed on a system (such as a testbed system). The tests are
those supplied in the source package.
adt-run runs each test supplied by a particular package and reports the
results. It drives the specified virtualisation regime as appropriate,
and parses the test description metadata, and arranges for data to be
copied to and from the testbed as required.
See /usr/share/doc/autopkgtest/README.running-tests.rst.gz for an
introduction about how to use adt-run.
SPECIFYING TESTS
Actions specify the source and binary packages to test, or change what
happens with package arguments:
--source dsc
Run tests from Debian source package dsc. By default the package
will also be built and the resulting binaries will be used to
satisfy test dependencies; to disable that, specify the -B/--no-
built-binaries option before.
The ordering is significant: each --source option should precede
options whose dependencies are to be satisfied by the binaries
it produces.
--unbuilt-tree directory
Specifies that tests from the unbuilt Debian source tree
directory should be run. This is very similar to specifying
--source except that a directory tree (which should be pristine)
is supplied, instead of a source package.
--built-tree directory
Specifies that tests from the built Debian source tree directory
should be run. Note that all test dependencies are then
satisfied by archive packages, unless you explicitly specify
locally built .debs with --binary.
--apt-source srcpkgname
Downloads srcpkgname with apt-get source in the testbed and run
its tests. This is similar to specifying --source but avoids
copying the source from the host to the testbed. Possibly built
binaries will not be used to satisfy dependencies, as usually in
this mode you want to test binaries from a real archive.
--git-source URL [branchname]
Specifies that tests from the unbuilt Debian source tree from
git-cloning URL should be run. If branchname is given, this
branch will be checked out instead of the default (usually
"master").
This is very similar to specifying --unbuilt-tree after cloning,
i. e. this is commonly used with --no-built-binaries. The git
package will be installed if necessary.
--binary deb
Specifies that deb should be used for tests of all following
source packages. By default it will be used to satisfy
dependencies, both during building and testing.
The ordering is significant, as for --source. In particular, if
a subsequent source package will build a binary of the same
name, that will be used from then on, and deb will be ignored.
--changes changes
Specifies that the debs in the given .changes should be used for
tests of the source package in that .changes. Acts as if you had
specified the .debs and .dsc from a .changes file as explicit
arguments.
--click-source clicksrc
Path to click source tree for subsequent --click package.
--click clickpkg
If clickpkg is a file (*.click), install given click package
into testbed. If it is a click name (like "com.example.myapp"),
assume it is already installed in the testbed and read the
manifest from it.
Run click package tests from the preceding --click-source. If a
click source directory is not specified explicitly, it will be
downloaded according to the manifest's x-source entry. Currently
the only supported schema is vcs-bzr.
filename
Bare filename arguments are processed as if --built-tree,
--source, --unbuilt-tree, --apt-source, --binary, --changes,
--click-source, or --click was specified; the nature of the
argument is guessed from the form of the filename. In the case
of --built-tree, either the option must be specified, or the
filename must end in a slash; two slashes at the end are taken
to mean --unbuilt-tree. If a given directory has a "click"
subdirectory, it is interpreted as --click-source.
TEST OPTIONS
Unless stated otherwise, these affect all subsequent test arguments.
-B | --no-built-binaries
All built binaries from subsequent --source or --unbuilt-tree
tests will not be built or ignored, and dependencies are
satisfied with packages from the archive. Note that packages
still get built if a test requires build-needed.
--built-binaries
Subsequent --source or --unbuilt-tree tests will get built and
their dependencies be satisfied with the built binaries. This is
the default behaviour, so you only need this to revert a
previously specified --no-built-binaries option.
--override-control=PATH
Read the test metadata from PATH instead of debian/tests/control
(for Debian sources) or the Click manifest for the following
test.
--testname=TEST
Run only the given test name (from test control file) in the
following test.
LOGGING OPTIONS
If you don't specify any option, adt-run only writes its output/results
to stderr.
-o dir | --output-dir=dir
Specifies that test artifacts (stderr and stdout from the tests,
the log file, built binary packages etc.) should be placed in
the given directory. dir must not exist yet or be empty,
otherwise adt-run will refuse to use it.
-l logfile | --log-file=logfile
Specifies that the trace log should be written to logfile
instead of to output-dir.
--summary=summary
Specifies that a summary of the outcome should be written to
summary. The events in the summary are written to the log in
any case.
-q | --quiet
Do not send a copy of adt-run's trace logstream to stderr. This
option does not affect the copy sent to logfile or output-dir.
Note that without the trace logstream it can be very hard to
diagnose problems.
TEST BED SETUP OPTIONS
--setup-commands=commands
Run commands after opening the testbed. This can be used e. g.
to enable additional apt sources, run apt-get update or similar.
If commands is an existing file name, the commands are read from
that; otherwise it is a string with the actual commands that
gets run as-is. File names without directory will be searched in
both the current directory and in /usr/share/autopkgtest/setup-
commands/ so you do not need to give the full path for setup
scripts shipped with autopkgtest.
This option can be specified multiple times.
If --user is given or the test bed provides a suggested-normal-
user capability, the $AUTOPKGTEST_NORMAL_USER environment
variable will be set to that user.
If the setup commands affect anything in boot directories (like
/boot or /lib/systemd/system) and the testbed supports
rebooting, the testbed will be rebooted after the setup
commands. This can be suppressed by creating a file
/run/autopkgtest_no_reboot.stamp.
--apt-upgrade | -U
Run apt-get update and apt-get dist-upgrade -y in the testbed
before running the tests.
--apt-pocket=pocket[=pkgname,src:srcname,...]
Add apt sources for release-pocket. This finds the first deb
line in /etc/apt/sources.list which does not already specify a
pocket and adds a deb and deb-src line with that pocket to
/etc/apt/sources.list.d/pocket.list. This also calls apt-get
update for the new pocket (but not for anything else).
If a package list is given after =, set up apt pinning to use
only those packages from pocket. An entry "src:srcname" expands
to all binary packages built by that source. This can be used
for minimizing dependencies taken from pocket so that package
updates in that pocket can be tested independently from each
other for better isolation. Attention: This does not currently
resolve some situations where dependencies of the given packages
can only be resolved in the given pocket. In that case the apt
pinning will be removed and package installation will be retried
with the entirety of pocket.
--copy=HOSTPATH:TESTBEDPATH
Copy file or directory from host into testbed after opening.
This happens before --setup-commands thus you can use these
files in the setup commands.
--env=VAR=value
Set arbitrary environment variable in the build and test. Can be
specified multiple times.
USER/PRIVILEGE HANDLING OPTIONS
-u user | --user=user
Run builds and tests as user on the testbed. This needs root on
the testbed; if root on the testbed is not available then builds
and tests run as whatever user is provided.
--gain-root=gain-root
Prefixes debian/rules binary with gain-root. The default is not
to use anything, except that if --user is supplied or root on
the testbed is not available the default is fakeroot.
DEBUGGING OPTIONS
--debug|-d
Include additional debugging information in the trace log. Each
additional -d increases the debugging level; the current maximum
is -ddd. If you like to see what's going on, -d or -dd is
recommended.
--shell-fail|-s
Run an interactive shell in the testbed after a failed build,
test, or dependency installation.
--shell
Run an interactive shell in the testbed after every test.
TIMEOUT OPTIONS
--timeout-which=seconds
Use a different timeout for operations on or with the testbed.
There are five timeouts affected by five values of which: short:
supposedly short operations like setting up the testbed's apt
and checking the state (default: 100s); install: installation of
packages including dependencies (default: 3,000s); test: test
runs (default: 10,000s); copy: copy files/directories between
host and testbed (default: 300s); and build: builds (default:
100,000s). The value must be specified as an integer number of
seconds.
--timeout-factor=double
Multiply all of the default timeouts by the specified factor
(see --timeout-which above). Only the defaults are affected;
explicit timeout settings are used exactly as specified.
LOCALE OPTIONS
--set-lang=langval
When running commands on the testbed, sets the LANG environment
variable to langval. The default in adt-run is to set it to
C.UTF-8.
OTHER OPTIONS
--no-auto-control
Disable automatic test generation with autodep8, even if it is
installed. In that case, packages without tests will exit with
code 8 ("No tests in this package") just like without autodep8.
--build-parallelN
Set parallel=N DEB_BUILD_OPTION for building packages. By
default this is the number of available processors. This is
mostly useful in containers where you can restrict the available
RAM, but not restrict the number of CPUs.
-h|--help
Show command line help and exit.
VIRTUALIZATION SERVER
--- virt-server virt-server-arg...
Specifies the virtualisation regime server, as a command and
arguments to invoke. virt-server must be an existing
autopkgtest virtualization server such as schroot or qemu.
All the remaining arguments and options after --- are passed to
the virtualisation server program. See the manpages of the
individual servers for how to use them.
OUTPUT FORMAT
During a normal test run, one line is printed for each test. This
consists of a short string identifying the test, some horizontal
whitespace, and either PASS or FAIL reason or SKIP reason where the
pass/fail indication is separated by any reason by some horizontal
whitespace.
The string to identify the test consists of a short alphanumeric string
invented by adt-run to distinguish different command-line arguments,
the argid, followed by a hyphen and the test name.
Sometimes a SKIP will be reported when the name of the test is not
known or not applicable: for example, when there are no tests in the
package, or a there is a test stanza which contains features not
understood by this version of adt-run. In this case * will appear
where the name of the test should be.
If adt-run detects that erroneous package(s) are involved, it will
print the two lines blame: blamed-thing... and badpkg: message. Here
each whitespace-separated blamed-thing is one of arg:argument
(representing a pathname found in a command line argument), dsc:package
(a source package name), deb:package (a binary package name) or
possibly other strings to be determined. This indicates which
arguments and/or packages might have contributed to the problem; the
ones which were processed most recently and which are therefore most
likely to be the cause of a problem are listed last.
CONFIGURATION FILES
If you use lots of options or nontrivial virt server arguments, you can
put any part of the command line into a text file, with one line per
option. E. g. you can create a file sid.cfg with contents like
-s
--output-dir=/tmp/testout
--apt-upgrade
---
schroot
sid
and then run
adt-run foo_1_amd64.changes @sid.cfg
The contents of the configuration file will be expanded in-place as if
you would have given its contents on the command line. Please ensure
that you don't place spaces between short options and their values,
they would become a part of the argument value.
EXIT STATUS
0 all tests passed
2 at least one test skipped
4 at least one test failed
6 at least one test failed and at least one test skipped
8 no tests in this package
12 erroneous package
16 testbed failure
20 other unexpected failures including bad usage
SEE ALSO
/usr/share/doc/autopkgtest/README.running-tests.rst.gz
/usr/share/doc/autopkgtest/README.package-tests.rst.gz
AUTHORS AND COPYRIGHT
This manpage is part of autopkgtest, a tool for testing Debian binary
packages. autopkgtest is Copyright (C) 2006-2014 Canonical Ltd.
See /usr/share/doc/autopkgtest/CREDITS for the list of contributors and
full copying conditions.
Free and Open Source Software