RlwrapFilter(3pm)
NAME
RlwrapFilter - Perl class for rlwrap filters
SYNOPSIS
use lib $ENV{RLWRAP_FILTERDIR};
use RlwrapFilter;
$filter = new RlwrapFilter;
$filter -> output_handler(sub {s/apple/orange/; $_}); # re-write output
$filter -> prompt_handler(\&pimp_the_prompt); # change prompt
$filter -> history_handler(sub {s/with password \w+/with password ****/; $_}); # keep passwords out of history
$filter -> run;
DESCRIPTION
rlwrap (1) (<https://github.com//hanslub42/rlwrap>) is a tiny utility
that sits between the user and any console command, in order to bestow
readline capabilities (line editing, history recall) to commands that
don't have them.
Since version 0.32, rlwrap can use filters to script almost every
aspect of rlwrap's interaction with the user: changing the history, re-
writing output and input, calling a pager or computing completion word
lists from the current input.
RlwrapFilter makes it very simple to write rlwrap filters in perl. A
filter only needs to instantiate a RlwrapFilter object, change a few of
its default handlers and then call its 'run' method.
PUBLIC METHODS
CONSTRUCTOR
$f = new RlwrapFilter
$f = RlwrapFilter -> new(prompt_handler => sub {"Hi! > "},
minimal_rlwrap_version => "0.35", ...)
Return a new RlwrapFilter object.
SETTING/GETTING HANDLERS
Handlers are user-defined callbacks that get called from the 'run'
method with a message (i.e. the un-filtered input, output, prompt) as
their first argument. For convenience, $_ is set to the same value.
They should return the re-written message text. They get called in a
fixed cyclic order: prompt, completion, history, input, echo, output,
prompt, ... etc ad infinitum. Rlwrap may always skip a handler when in
direct mode, on the other hand, completion and output handlers may get
called more than once in succession. If a handler is left undefined,
the result is as if the message text were returned unaltered.
It is important to note that the filter, and hence all its handlers,
are bypassed when command is in direct mode, i.e. when it asks for
single keystrokes (and also, for security reasons, when it doesn't
echo, e.g. when asking for a password). If you don't want this to
happen, use rlwrap -a to force rlwrap to remain in readline mode and to
apply the filter to all of command's in- and output. This will make
editors and pagers (which respond to single keystrokes) unusable,
unless you use rlwrap's -N option (linux only)
The getters/setters for the respective handlers are listed below:
$handler = $f -> prompt_handler, $f -> prompt_handler(\&handler)
The prompt handler re-writes prompts and gets called when rlwrap
decides it is time to "cook" the prompt, by default some 40 ms
after the last output has arrived. Of course, rlwrap cannot read
the mind of command, so what looks like a prompt to rlwrap may
actually be the beginning of an output line that took command a
little longer to formulate. If this is a problem, specify a longer
"cooking" time with rlwrap's -w option, use the
prompts_are_never_empty method or "reject" the prompt (cf. the
prompt_rejected method)
$handler = $f -> completion_handler, $f ->
completion_handler(\&handler)
The completion handler gets called with the the entire input line,
the prefix (partial word to complete), and rlwrap's own completion
list as arguments. It should return a (possibly revised) list of
completions. As an example, suppose the user has typed "She played
for A<TAB>". The handler will be called like this:
myhandler("She played for A", "A", "Arsenal", "Arendal", "Anderlecht")
it could then return a list of stronger clubs: ("Ajax", "AZ67",
"Arnhem")
$handler = $f -> history_handler, $f -> history_handler(\&handler)
Every input line is submitted to this handler, the return value is
put in rlwrap's history. Returning an empty or undefined value will
keep the input line out of the history.
$handler = $f -> input_handler, $f -> input_handler(\&handler)
Every input line is submitted to this handler, The handler's return
value is written to command's pty (pseudo-terminal).
$handler = $f -> echo_handler, $f -> echo_handler(\&handler)
The first line of output that is read back from command's pty is
the echo'ed input line. If your input handler alters the input
line, it is the altered input that will be echo'ed back. If you
don't want to confuse the user, use an echo handler that returns
your original input.
If you use rlwrap in --multi-line mode, additional echo lines will
have to be handled by the output handler
$handler = $f -> output_handler, $f -> output_handler(\&handler)
All command output after the echo line is submitted to the output
handler (including newlines). This handler may get called many
times in succession, dependent on the size of command's write()
calls, and the whims of your system's scheduler. Therefore your
handler should be prepared to rewrite your output in "chunks",
where you even don't have the guarantee that the chunks contain
entire unbroken lines.
If you want to handle command's entire output in one go, you can
specify an output handler that returns an empty string, and then
use $filter -> cumulative_output in your prompt handler to send the
re-written output "out-of-band" just before the prompt:
$filter -> output_handler(sub {""});
$filter -> prompt_handler(
sub{ $filter -> send_output_oob(mysub($filter -> cumulative_output));
"Hi there > "
});
Note that when rlwrap is run in --multi-line mode the echo handler
will still only handle the first echo line. The remainder will
generally be echoed back preceded by a continuation prompt; it is
up to the output handler what to do with it.
$handler = $f -> message_handler, $f -> message_handler(\&handler)
This handler gets called (as handler($message, $tag)) for every
incoming message, and every tag (including out-of-band tags),
before all other handlers. Its return value is ignored, but it may
be useful for logging and debugging purposes. The $tag is an
integer that can be converted to a tag name by the 'tag2name'
method
OTHER METHODS
$f -> help_text("Usage...")
Set the help text for this filter. It will be displayed by rlwrap
-z <filter>. The second line of the help text is used by "rlwrap -z
listing"; it should be a short description of what the filter does.
$f -> minimal_rlwrap_version("x.yy")
Die unless rlwrap is version x.yy or newer
$dir = $f -> cwd
return the name of command's current working directory. This uses
the /proc filesystem, and may only work on newer linux systems (on
older linux and on Solaris, it will return something like
"/proc/12345/cwd", useful to find the contents of command's working
directory, but not its name)
$text = $f -> cumulative_output
return the current cumulative output. All (untreated) output gets
appended to the cumulative output after the output_handler has been
called. The cumulative output starts with a fresh slate with every
OUTPUT message that directly follows an INPUT message (ignoring
out-of-band messages and rejected prompts)
When necessary (i.e. when rlwrap is in "impatient mode") the prompt
is removed from $filter->cumulative_output by the time the prompt
handler is called.
$tag = $f -> previous_tag
The tag of the last preceding in-band message. A tag is an integer
between 0 and 255, its name can be found with the following method:
$name = $f -> tag2name($tag)
Convert the tag (an integer) to its name (e.g. "TAG_PROMPT")
$name = $f -> name2tag($tag)
Convert a valid tag name like "TAG_PROMPT" to a tag (an integer)
$f -> send_output_oob($text)
Make rlwrap display $text. $text is sent "out-of-band": rlwrap will
not see it until just after it has sent the next message to the
filter
$f -> send_ignore_oob($text)
Send an out-of-band TAG_IGNORE message to rlwrap. rlwrap will
silently discard it, but it can be useful when debugging filters
$f -> add_to_completion_list(@words)
$f -> remove_from_completion_list(@words)
Permanently add or remove the words in @words to/from rlwrap's
completion list.
$f -> cloak_and_dagger($question, $prompt, $timeout);
Send $question to command's input and read back everything that
comes back until $prompt is seen at "end-of-chunk", or no new
chunks arrive for $timeout seconds, whichever comes first. Return
the response (without the final $prompt). rlwrap remains
completely unaware of this conversation.
$f -> cloak_and_dagger_verbose($verbosity)
If $verbosity evaluates to a true value, make rlwrap print all
questions sent to command by the "cloak_and_dagger" method, and
command's responses. By default, $verbosity = 0; setting it to 1
will mess up the screen but greatly facilitate the (otherwise
rather tricky) use of "cloak_and_dagger"
$self -> prompt_rejected
A special text ("_THIS_CANNOT_BE_A_PROMPT_") to be returned by a
prompt handler to "reject" the prompt. This will make rlwrap skip
cooking the prompt. $self->previous_tag and
$self->cumulative_output will not be touched.
$text = $f -> prompts_are_never_empty($val)
If $val evaluates to a true value, automatically reject empty
prompts.
$f -> command_line
In scalar context: the rlwrapped command and its arguments as a
string ("command -v blah") in list context: the same as a list
("command", "-v", "blah")
$f -> running_under_rlwrap
Whether the filter is run by rlwrap, or directly from the command
line
$f -> run
Start an event loop that reads rlwrap's messages from the input
pipe, calls the appropriate handlers and writes the result to the
output pipe. This method never returns.
LOW LEVEL PROTOCOL
rlwrap communicates with a filter through messages consisting of a tag
byte (TAG_OUTPUT, TAG_PROMPT etc. - to inform the filter of what is
being sent), an unsigned 32-bit integer containing the length of the
message, the message text and an extra newline. For every message sent,
rlwrap expects, and waits for an answer message with the same tag.
Sending back a different (in-band) tag is an error and instantly kills
rlwrap, though filters may precede their answer message with "out-of-
band" messages to output text (TAG_OUTPUT_OUT_OF_BAND), report errors
(TAG_ERROR), and to manipulate the completion word list
(TAG_ADD_TO_COMPLETION_LIST and TAG_REMOVE_FROM_COMPLETION_LIST) Out-
of-band messages are not serviced by rlwrap until right after it has
sent the next in-band message - the communication with the filter is
synchronous and driven by rlwrap.
Messages are received and sent via two pipes. STDIN, STDOUT and STDERR
are still connected to the user's terminal, and you can read and write
them directly, though this may mess up the screen and confuse the user
unless you are careful. A filter can even communicate with the
rlwrapped command behind rlwrap's back (cf the cloak_and_dagger()
method)
The protocol uses the following tags (tags > 128 are out-of-band)
TAG_INPUT 0
TAG_OUTPUT 1
TAG_HISTORY 2
TAG_COMPLETION 3
TAG_PROMPT 4
TAG_IGNORE 251
TAG_ADD_TO_COMPLETION_LIST 252
TAG_REMOVE_FROM_COMPLETION_LIST 253
TAG_OUTPUT_OUT_OF_BAND 254
TAG_ERROR 255
To see how this works, you can eavesdrop on the protocol using the
'logger' filter.
The constants TAG_INPUT, ... are exported by the RlwrapFilter.pm
module.
SIGNALS
As STDIN is still connected to the users teminal, one might expect the
filter to receive SIGINT, SIGTERM, SIGTSTP directly from the terminal
driver if the user presses CTRL-C, CTRL-Z etc Normally, we don't want
this - it would confuse rlwrap, and the user (who thinks she is talking
straight to the rlwapped command) probably meant those signals to be
sent to the command itself. For this reason the filter starts with all
signals blocked.
Filters that interact with the users terminal (e.g. to run a pager)
should unblock signals like SIGTERM, SIGWINCH.
FILTER LIFETIME
The filter is started by rlwrap after command, and stays alive as long
as rlwrap runs. Filter methods are immediately usable. When command
exits, the filter stays around for a little longer in order to process
command's last words. As calling the cwd and cloak_and_dagger methods
at that time will make the filter die with an error, it may be
advisable to wrap those calls in eval{}
If a filter calls die() it will send an (out-of-band) TAG_ERROR message
to rlwrap before exiting. rlwrap will then report the message and exit
(just after its next in-band message - out-of-band messages are not
always processed immediately)
die() within an eval() sets $@ as usual.
ENVIRONMENT
Before calling a filter, rlwrap sets the following environment
variables:
RLWRAP_FILTERDIR directory where RlwrapFilter.pm and most filters live (set by B<rlwrap>, can be
overridden by the user before calling rlwrap)
PATH rlwrap automatically adds $RLWRAP_FILTERDIR to the front of filter's PATH
RLWRAP_VERSION rlwrap version (e.g. "0.35")
RLWRAP_COMMAND_PID process ID of the rlwrapped command
RLWRAP_COMMAND_LINE command line of the rlwrapped command
RLWRAP_IMPATIENT whether rlwrap is in "impatient mode" (cf B<rlwrap (1)>). In impatient mode,
the candidate prompt is filtered through the output handler (and displayed before
being overwritten by the cooked prompt).
RLWRAP_INPUT_PIPE_FD File descriptor of input pipe. For internal use only
RLWRAP_OUTPUT_PIPE_FD File descriptor of output pipe. For internal use only
RLWRAP_MASTER_PTY_FD File descriptor of I<command>'s pty.
DEBUGGING FILTERS
While RlwrapFilter.pm makes it easy to write simple filters, debugging
them can be a problem. A couple of useful tricks:
LOGGING
When running a filter, the in- and outgoing messages can be logged by
the logger filter, using a pipeline:
rlwrap -z 'pipeline logger incoming : my_filter : logger outgoing' command
RUNNING WITHOUT rlwrap
When called by rlwrap, filters get their input from
$RLWRAP_INPUT_PIPE_FD and write their output to $RLWRAP_OUTPUT_PIPE_FD,
and expect and write messages consisting of a tag byte, a 32-bit length
and the message proper. This is not terribly useful when running a
filter directly from the command line (outside rlwrap), even if we set
the RLWRAP_*_FD ourselves.
Therefore, when run directly from the command line, a filter expects
input messages on its standard input of the form
TAG_PROMPT myprompt >
(i.a. a tag name, one space and a message followed by a newline) and it
will respond in the same way on its standard output
SEE ALSO
rlwrap (1), readline (3)
Free and Open Source Software