systemd.resource-control(5)
NAME
systemd.resource-control - Resource control unit settings
SYNOPSIS
slice.slice, scope.scope, service.service, socket.socket, mount.mount,
swap.swap
DESCRIPTION
Unit configuration files for services, slices, scopes, sockets, mount
points, and swap devices share a subset of configuration options for
resource control of spawned processes. Internally, this relies on the
Linux Control Groups (cgroups) kernel concept for organizing processes
in a hierarchical tree of named groups for the purpose of resource
management.
This man page lists the configuration options shared by those six unit
types. See systemd.unit(5) for the common options of all unit
configuration files, and systemd.slice(5), systemd.scope(5),
systemd.service(5), systemd.socket(5), systemd.mount(5), and
systemd.swap(5) for more information on the specific unit configuration
files. The resource control configuration options are configured in the
[Slice], [Scope], [Service], [Socket], [Mount], or [Swap] sections,
depending on the unit type.
In addition, options which control resources available to programs
executed by systemd are listed in systemd.exec(5). Those options
complement options listed here.
See the New Control Group Interfaces[1] for an introduction on how to
make use of resource control APIs from programs.
AUTOMATIC DEPENDENCIES
Units with the Slice= setting set automatically acquire Requires= and
After= dependencies on the specified slice unit.
UNIFIED AND LEGACY CONTROL GROUP HIERARCHIES
The unified control group hierarchy is the new version of kernel
control group interface, see cgroup-v2.txt[2]. Depending on the
resource type, there are differences in resource control capabilities.
Also, because of interface changes, some resource types have separate
set of options on the unified hierarchy.
CPU
Due to the lack of consensus in the kernel community, the CPU
controller support on the unified control group hierarchy requires
out-of-tree kernel patches. See cgroup-v2-cpu.txt[3].
CPUWeight= and StartupCPUWeight= replace CPUShares= and
StartupCPUShares=, respectively.
The "cpuacct" controller does not exist separately on the unified
hierarchy.
Memory
MemoryMax= replaces MemoryLimit=. MemoryLow= and MemoryHigh= are
effective only on unified hierarchy.
IO
IO prefixed settings are superset of and replace BlockIO prefixed
ones. On unified hierarchy, IO resource control also applies to
buffered writes.
To ease the transition, there is best-effort translation between the
two versions of settings. For each controller, if any of the settings
for the unified hierarchy are present, all settings for the legacy
hierarchy are ignored. If the resulting settings are for the other type
of hierarchy, the configurations are translated before application.
Legacy control group hierarchy (see cgroups.txt[4]), also called
cgroup-v1, doesn't allow safe delegation of controllers to unprivileged
processes. If the system uses the legacy control group hierarchy,
resource control is disabled for systemd user instance, see systemd(1).
OPTIONS
Units of the types listed above can have settings for resource control
configuration:
CPUAccounting=
Turn on CPU usage accounting for this unit. Takes a boolean
argument. Note that turning on CPU accounting for one unit will
also implicitly turn it on for all units contained in the same
slice and for all its parent slices and the units contained
therein. The system default for this setting may be controlled with
DefaultCPUAccounting= in systemd-system.conf(5).
CPUWeight=weight, StartupCPUWeight=weight
Assign the specified CPU time weight to the processes executed, if
the unified control group hierarchy is used on the system. These
options take an integer value and control the "cpu.weight" control
group attribute. The allowed range is 1 to 10000. Defaults to 100.
For details about this control group attribute, see
cgroup-v2.txt[2] and sched-design-CFS.txt[5]. The available CPU
time is split up among all units within one slice relative to their
CPU time weight.
While StartupCPUWeight= only applies to the startup phase of the
system, CPUWeight= applies to normal runtime of the system, and if
the former is not set also to the startup phase. Using
StartupCPUWeight= allows prioritizing specific services at boot-up
differently than during normal runtime.
Implies "CPUAccounting=true".
These settings replace CPUShares= and StartupCPUShares=.
CPUQuota=
Assign the specified CPU time quota to the processes executed.
Takes a percentage value, suffixed with "%". The percentage
specifies how much CPU time the unit shall get at maximum, relative
to the total CPU time available on one CPU. Use values > 100% for
allotting CPU time on more than one CPU. This controls the
"cpu.max" attribute on the unified control group hierarchy and
"cpu.cfs_quota_us" on legacy. For details about these control group
attributes, see cgroup-v2.txt[2] and sched-design-CFS.txt[5].
Example: CPUQuota=20% ensures that the executed processes will
never get more than 20% CPU time on one CPU.
Implies "CPUAccounting=true".
MemoryAccounting=
Turn on process and kernel memory accounting for this unit. Takes a
boolean argument. Note that turning on memory accounting for one
unit will also implicitly turn it on for all units contained in the
same slice and for all its parent slices and the units contained
therein. The system default for this setting may be controlled with
DefaultMemoryAccounting= in systemd-system.conf(5).
MemoryLow=bytes
Specify the best-effort memory usage protection of the executed
processes in this unit. If the memory usages of this unit and all
its ancestors are below their low boundaries, this unit's memory
won't be reclaimed as long as memory can be reclaimed from
unprotected units.
Takes a memory size in bytes. If the value is suffixed with K, M, G
or T, the specified memory size is parsed as Kilobytes, Megabytes,
Gigabytes, or Terabytes (with the base 1024), respectively.
Alternatively, a percentage value may be specified, which is taken
relative to the installed physical memory on the system. This
controls the "memory.low" control group attribute. For details
about this control group attribute, see cgroup-v2.txt[2].
Implies "MemoryAccounting=true".
This setting is supported only if the unified control group
hierarchy is used and disables MemoryLimit=.
MemoryHigh=bytes
Specify the high limit on memory usage of the executed processes in
this unit. Memory usage may go above the limit if unavoidable, but
the processes are heavily slowed down and memory is taken away
aggressively in such cases. This is the main mechanism to control
memory usage of a unit.
Takes a memory size in bytes. If the value is suffixed with K, M, G
or T, the specified memory size is parsed as Kilobytes, Megabytes,
Gigabytes, or Terabytes (with the base 1024), respectively.
Alternatively, a percentage value may be specified, which is taken
relative to the installed physical memory on the system. If
assigned the special value "infinity", no memory limit is applied.
This controls the "memory.high" control group attribute. For
details about this control group attribute, see cgroup-v2.txt[2].
Implies "MemoryAccounting=true".
This setting is supported only if the unified control group
hierarchy is used and disables MemoryLimit=.
MemoryMax=bytes
Specify the absolute limit on memory usage of the executed
processes in this unit. If memory usage cannot be contained under
the limit, out-of-memory killer is invoked inside the unit. It is
recommended to use MemoryHigh= as the main control mechanism and
use MemoryMax= as the last line of defense.
Takes a memory size in bytes. If the value is suffixed with K, M, G
or T, the specified memory size is parsed as Kilobytes, Megabytes,
Gigabytes, or Terabytes (with the base 1024), respectively.
Alternatively, a percentage value may be specified, which is taken
relative to the installed physical memory on the system. If
assigned the special value "infinity", no memory limit is applied.
This controls the "memory.max" control group attribute. For details
about this control group attribute, see cgroup-v2.txt[2].
Implies "MemoryAccounting=true".
This setting replaces MemoryLimit=.
MemorySwapMax=bytes
Specify the absolute limit on swap usage of the executed processes
in this unit.
Takes a swap size in bytes. If the value is suffixed with K, M, G
or T, the specified swap size is parsed as Kilobytes, Megabytes,
Gigabytes, or Terabytes (with the base 1024), respectively. If
assigned the special value "infinity", no swap limit is applied.
This controls the "memory.swap.max" control group attribute. For
details about this control group attribute, see cgroup-v2.txt[2].
Implies "MemoryAccounting=true".
This setting is supported only if the unified control group
hierarchy is used and disables MemoryLimit=.
TasksAccounting=
Turn on task accounting for this unit. Takes a boolean argument. If
enabled, the system manager will keep track of the number of tasks
in the unit. The number of tasks accounted this way includes both
kernel threads and userspace processes, with each thread counting
individually. Note that turning on tasks accounting for one unit
will also implicitly turn it on for all units contained in the same
slice and for all its parent slices and the units contained
therein. The system default for this setting may be controlled with
DefaultTasksAccounting= in systemd-system.conf(5).
TasksMax=N
Specify the maximum number of tasks that may be created in the
unit. This ensures that the number of tasks accounted for the unit
(see above) stays below a specific limit. This either takes an
absolute number of tasks or a percentage value that is taken
relative to the configured maximum number of tasks on the system.
If assigned the special value "infinity", no tasks limit is
applied. This controls the "pids.max" control group attribute. For
details about this control group attribute, see pids.txt[6].
Implies "TasksAccounting=true". The system default for this setting
may be controlled with DefaultTasksMax= in systemd-system.conf(5).
IOAccounting=
Turn on Block I/O accounting for this unit, if the unified control
group hierarchy is used on the system. Takes a boolean argument.
Note that turning on block I/O accounting for one unit will also
implicitly turn it on for all units contained in the same slice and
all for its parent slices and the units contained therein. The
system default for this setting may be controlled with
DefaultIOAccounting= in systemd-system.conf(5).
This setting replaces BlockIOAccounting= and disables settings
prefixed with BlockIO or StartupBlockIO.
IOWeight=weight, StartupIOWeight=weight
Set the default overall block I/O weight for the executed
processes, if the unified control group hierarchy is used on the
system. Takes a single weight value (between 1 and 10000) to set
the default block I/O weight. This controls the "io.weight" control
group attribute, which defaults to 100. For details about this
control group attribute, see cgroup-v2.txt[2]. The available I/O
bandwidth is split up among all units within one slice relative to
their block I/O weight.
While StartupIOWeight= only applies to the startup phase of the
system, IOWeight= applies to the later runtime of the system, and
if the former is not set also to the startup phase. This allows
prioritizing specific services at boot-up differently than during
runtime.
Implies "IOAccounting=true".
These settings replace BlockIOWeight= and StartupBlockIOWeight= and
disable settings prefixed with BlockIO or StartupBlockIO.
IODeviceWeight=device weight
Set the per-device overall block I/O weight for the executed
processes, if the unified control group hierarchy is used on the
system. Takes a space-separated pair of a file path and a weight
value to specify the device specific weight value, between 1 and
10000. (Example: "/dev/sda 1000"). The file path may be specified
as path to a block device node or as any other file, in which case
the backing block device of the file system of the file is
determined. This controls the "io.weight" control group attribute,
which defaults to 100. Use this option multiple times to set
weights for multiple devices. For details about this control group
attribute, see cgroup-v2.txt[2].
Implies "IOAccounting=true".
This setting replaces BlockIODeviceWeight= and disables settings
prefixed with BlockIO or StartupBlockIO.
IOReadBandwidthMax=device bytes, IOWriteBandwidthMax=device bytes
Set the per-device overall block I/O bandwidth maximum limit for
the executed processes, if the unified control group hierarchy is
used on the system. This limit is not work-conserving and the
executed processes are not allowed to use more even if the device
has idle capacity. Takes a space-separated pair of a file path and
a bandwidth value (in bytes per second) to specify the device
specific bandwidth. The file path may be a path to a block device
node, or as any other file in which case the backing block device
of the file system of the file is used. If the bandwidth is
suffixed with K, M, G, or T, the specified bandwidth is parsed as
Kilobytes, Megabytes, Gigabytes, or Terabytes, respectively, to the
base of 1000. (Example:
"/dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0 5M"). This
controls the "io.max" control group attributes. Use this option
multiple times to set bandwidth limits for multiple devices. For
details about this control group attribute, see cgroup-v2.txt[2].
Implies "IOAccounting=true".
These settings replace BlockIOReadBandwidth= and
BlockIOWriteBandwidth= and disable settings prefixed with BlockIO
or StartupBlockIO.
IOReadIOPSMax=device IOPS, IOWriteIOPSMax=device IOPS
Set the per-device overall block I/O IOs-Per-Second maximum limit
for the executed processes, if the unified control group hierarchy
is used on the system. This limit is not work-conserving and the
executed processes are not allowed to use more even if the device
has idle capacity. Takes a space-separated pair of a file path and
an IOPS value to specify the device specific IOPS. The file path
may be a path to a block device node, or as any other file in which
case the backing block device of the file system of the file is
used. If the IOPS is suffixed with K, M, G, or T, the specified
IOPS is parsed as KiloIOPS, MegaIOPS, GigaIOPS, or TeraIOPS,
respectively, to the base of 1000. (Example:
"/dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0 1K"). This
controls the "io.max" control group attributes. Use this option
multiple times to set IOPS limits for multiple devices. For details
about this control group attribute, see cgroup-v2.txt[2].
Implies "IOAccounting=true".
These settings are supported only if the unified control group
hierarchy is used and disable settings prefixed with BlockIO or
StartupBlockIO.
DeviceAllow=
Control access to specific device nodes by the executed processes.
Takes two space-separated strings: a device node specifier followed
by a combination of r, w, m to control reading, writing, or
creation of the specific device node(s) by the unit (mknod),
respectively. This controls the "devices.allow" and "devices.deny"
control group attributes. For details about these control group
attributes, see devices.txt[7].
The device node specifier is either a path to a device node in the
file system, starting with /dev/, or a string starting with either
"char-" or "block-" followed by a device group name, as listed in
/proc/devices. The latter is useful to whitelist all current and
future devices belonging to a specific device group at once. The
device group is matched according to file name globbing rules, you
may hence use the "*" and "?" wildcards. Examples: /dev/sda5 is a
path to a device node, referring to an ATA or SCSI block device.
"char-pts" and "char-alsa" are specifiers for all pseudo TTYs and
all ALSA sound devices, respectively. "char-cpu/*" is a specifier
matching all CPU related device groups.
DevicePolicy=auto|closed|strict
Control the policy for allowing device access:
strict
means to only allow types of access that are explicitly
specified.
closed
in addition, allows access to standard pseudo devices including
/dev/null, /dev/zero, /dev/full, /dev/random, and /dev/urandom.
auto
in addition, allows access to all devices if no explicit
DeviceAllow= is present. This is the default.
Slice=
The name of the slice unit to place the unit in. Defaults to
system.slice for all non-instantiated units of all unit types
(except for slice units themselves see below). Instance units are
by default placed in a subslice of system.slice that is named after
the template name.
This option may be used to arrange systemd units in a hierarchy of
slices each of which might have resource settings applied.
For units of type slice, the only accepted value for this setting
is the parent slice. Since the name of a slice unit implies the
parent slice, it is hence redundant to ever set this parameter
directly for slice units.
Special care should be taken when relying on the default slice
assignment in templated service units that have
DefaultDependencies=no set, see systemd.service(5), section
"Automatic Dependencies" for details.
Delegate=
Turns on delegation of further resource control partitioning to
processes of the unit. For unprivileged services (i.e. those using
the User= setting), this allows processes to create a subhierarchy
beneath its control group path. For privileged services and scopes,
this ensures the processes will have all control group controllers
enabled.
DEPRECATED OPTIONS
The following options are deprecated. Use the indicated superseding
options instead:
CPUShares=weight, StartupCPUShares=weight
Assign the specified CPU time share weight to the processes
executed. These options take an integer value and control the
"cpu.shares" control group attribute. The allowed range is 2 to
262144. Defaults to 1024. For details about this control group
attribute, see sched-design-CFS.txt[5]. The available CPU time is
split up among all units within one slice relative to their CPU
time share weight.
While StartupCPUShares= only applies to the startup phase of the
system, CPUShares= applies to normal runtime of the system, and if
the former is not set also to the startup phase. Using
StartupCPUShares= allows prioritizing specific services at boot-up
differently than during normal runtime.
Implies "CPUAccounting=true".
These settings are deprecated. Use CPUWeight= and StartupCPUWeight=
instead.
MemoryLimit=bytes
Specify the limit on maximum memory usage of the executed
processes. The limit specifies how much process and kernel memory
can be used by tasks in this unit. Takes a memory size in bytes. If
the value is suffixed with K, M, G or T, the specified memory size
is parsed as Kilobytes, Megabytes, Gigabytes, or Terabytes (with
the base 1024), respectively. Alternatively, a percentage value may
be specified, which is taken relative to the installed physical
memory on the system. If assigned the special value "infinity", no
memory limit is applied. This controls the "memory.limit_in_bytes"
control group attribute. For details about this control group
attribute, see memory.txt[8].
Implies "MemoryAccounting=true".
This setting is deprecated. Use MemoryMax= instead.
BlockIOAccounting=
Turn on Block I/O accounting for this unit, if the legacy control
group hierarchy is used on the system. Takes a boolean argument.
Note that turning on block I/O accounting for one unit will also
implicitly turn it on for all units contained in the same slice and
all for its parent slices and the units contained therein. The
system default for this setting may be controlled with
DefaultBlockIOAccounting= in systemd-system.conf(5).
This setting is deprecated. Use IOAccounting= instead.
BlockIOWeight=weight, StartupBlockIOWeight=weight
Set the default overall block I/O weight for the executed
processes, if the legacy control group hierarchy is used on the
system. Takes a single weight value (between 10 and 1000) to set
the default block I/O weight. This controls the "blkio.weight"
control group attribute, which defaults to 500. For details about
this control group attribute, see blkio-controller.txt[9]. The
available I/O bandwidth is split up among all units within one
slice relative to their block I/O weight.
While StartupBlockIOWeight= only applies to the startup phase of
the system, BlockIOWeight= applies to the later runtime of the
system, and if the former is not set also to the startup phase.
This allows prioritizing specific services at boot-up differently
than during runtime.
Implies "BlockIOAccounting=true".
These settings are deprecated. Use IOWeight= and StartupIOWeight=
instead.
BlockIODeviceWeight=device weight
Set the per-device overall block I/O weight for the executed
processes, if the legacy control group hierarchy is used on the
system. Takes a space-separated pair of a file path and a weight
value to specify the device specific weight value, between 10 and
1000. (Example: "/dev/sda 500"). The file path may be specified as
path to a block device node or as any other file, in which case the
backing block device of the file system of the file is determined.
This controls the "blkio.weight_device" control group attribute,
which defaults to 1000. Use this option multiple times to set
weights for multiple devices. For details about this control group
attribute, see blkio-controller.txt[9].
Implies "BlockIOAccounting=true".
This setting is deprecated. Use IODeviceWeight= instead.
BlockIOReadBandwidth=device bytes, BlockIOWriteBandwidth=device bytes
Set the per-device overall block I/O bandwidth limit for the
executed processes, if the legacy control group hierarchy is used
on the system. Takes a space-separated pair of a file path and a
bandwidth value (in bytes per second) to specify the device
specific bandwidth. The file path may be a path to a block device
node, or as any other file in which case the backing block device
of the file system of the file is used. If the bandwidth is
suffixed with K, M, G, or T, the specified bandwidth is parsed as
Kilobytes, Megabytes, Gigabytes, or Terabytes, respectively, to the
base of 1000. (Example:
"/dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0 5M"). This
controls the "blkio.throttle.read_bps_device" and
"blkio.throttle.write_bps_device" control group attributes. Use
this option multiple times to set bandwidth limits for multiple
devices. For details about these control group attributes, see
blkio-controller.txt[9].
Implies "BlockIOAccounting=true".
These settings are deprecated. Use IOReadBandwidthMax= and
IOWriteBandwidthMax= instead.
SEE ALSO
systemd(1), systemd.unit(5), systemd.service(5), systemd.slice(5),
systemd.scope(5), systemd.socket(5), systemd.mount(5), systemd.swap(5),
systemd.exec(5), systemd.directives(7), systemd.special(7), The
documentation for control groups and specific controllers in the Linux
kernel: cgroups.txt[4], cpuacct.txt[10], memory.txt[8],
blkio-controller.txt[9].
NOTES
1. New Control Group Interfaces
http://www.freedesktop.org/wiki/Software/systemd/ControlGroupInterface/
2. cgroup-v2.txt
https://www.kernel.org/doc/Documentation/cgroup-v2.txt
3. cgroup-v2-cpu.txt
https://git.kernel.org/cgit/linux/kernel/git/tj/cgroup.git/tree/Documentation/cgroup-v2-cpu.txt?h=cgroup-v2-cpu
4. cgroups.txt
https://www.kernel.org/doc/Documentation/cgroup-v1/cgroups.txt
5. sched-design-CFS.txt
https://www.kernel.org/doc/Documentation/scheduler/sched-design-CFS.txt
6. pids.txt
https://www.kernel.org/doc/Documentation/cgroup-v1/pids.txt
7. devices.txt
https://www.kernel.org/doc/Documentation/cgroup-v1/devices.txt
8. memory.txt
https://www.kernel.org/doc/Documentation/cgroup-v1/memory.txt
9. blkio-controller.txt
https://www.kernel.org/doc/Documentation/cgroup-v1/blkio-controller.txt
10. cpuacct.txt
https://www.kernel.org/doc/Documentation/cgroup-v1/cpuacct.txt
Free and Open Source Software