rsyncd.conf(5)
NAME
rsyncd.conf - configuration file for rsync in daemon mode
SYNOPSIS
rsyncd.conf
DESCRIPTION
The rsyncd.conf file is the runtime configuration file for rsync when
run as an rsync daemon.
The rsyncd.conf file controls authentication, access, logging and
available modules.
FILE FORMAT
The file consists of modules and parameters. A module begins with the
name of the module in square brackets and continues until the next
module begins. Modules contain parameters of the form "name = value".
The file is line-based -- that is, each newline-terminated line
represents either a comment, a module name or a parameter.
Only the first equals sign in a parameter is significant. Whitespace
before or after the first equals sign is discarded. Leading, trailing
and internal whitespace in module and parameter names is irrelevant.
Leading and trailing whitespace in a parameter value is discarded.
Internal whitespace within a parameter value is retained verbatim.
Any line beginning with a hash (#) is ignored, as are lines containing
only whitespace. (If a hash occurs after anything other than leading
whitespace, it is considered a part of the line's content.)
Any line ending in a \ is "continued" on the next line in the customary
UNIX fashion.
The values following the equals sign in parameters are all either a
string (no quotes needed) or a boolean, which may be given as yes/no,
0/1 or true/false. Case is not significant in boolean values, but is
preserved in string values.
LAUNCHING THE RSYNC DAEMON
The rsync daemon is launched by specifying the --daemon option to
rsync.
The daemon must run with root privileges if you wish to use chroot, to
bind to a port numbered under 1024 (as is the default 873), or to set
file ownership. Otherwise, it must just have permission to read and
write the appropriate data, log, and lock files.
You can launch it either via inetd, as a stand-alone daemon, or from an
rsync client via a remote shell. If run as a stand-alone daemon then
just run the command "rsync --daemon" from a suitable startup script.
When run via inetd you should add a line like this to /etc/services:
rsync 873/tcp
and a single line something like this to /etc/inetd.conf:
rsync stream tcp nowait root /usr/bin/rsync rsyncd --daemon
Replace "/usr/bin/rsync" with the path to where you have rsync
installed on your system. You will then need to send inetd a HUP
signal to tell it to reread its config file.
Note that you should not send the rsync daemon a HUP signal to force it
to reread the rsyncd.conf file. The file is re-read on each client
connection.
GLOBAL PARAMETERS
The first parameters in the file (before a [module] header) are the
global parameters. Rsync also allows for the use of a "[global]"
module name to indicate the start of one or more global-parameter
sections (the name must be lower case).
You may also include any module parameters in the global part of the
config file in which case the supplied value will override the default
for that parameter.
You may use references to environment variables in the values of
parameters. String parameters will have %VAR% references expanded as
late as possible (when the string is used in the program), allowing for
the use of variables that rsync sets at connection time, such as
RSYNC_USER_NAME. Non-string parameters (such as true/false settings)
are expanded when read from the config file. If a variable does not
exist in the environment, or if a sequence of characters is not a valid
reference (such as an un-paired percent sign), the raw characters are
passed through unchanged. This helps with backward compatibility and
safety (e.g. expanding a non-existent %VAR% to an empty string in a
path could result in a very unsafe path). The safest way to insert a
literal % into a value is to use %%.
motd file
This parameter allows you to specify a "message of the day" to
display to clients on each connect. This usually contains site
information and any legal notices. The default is no motd file.
This can be overridden by the --dparam=motdfile=FILE
command-line option when starting the daemon.
pid file
This parameter tells the rsync daemon to write its process ID to
that file. If the file already exists, the rsync daemon will
abort rather than overwrite the file. This can be overridden by
the --dparam=pidfile=FILE command-line option when starting the
daemon.
port You can override the default port the daemon will listen on by
specifying this value (defaults to 873). This is ignored if the
daemon is being run by inetd, and is superseded by the --port
command-line option.
address
You can override the default IP address the daemon will listen
on by specifying this value. This is ignored if the daemon is
being run by inetd, and is superseded by the --address
command-line option.
socket options
This parameter can provide endless fun for people who like to
tune their systems to the utmost degree. You can set all sorts
of socket options which may make transfers faster (or slower!).
Read the man page for the setsockopt() system call for details
on some of the options you may be able to set. By default no
special socket options are set. These settings can also be
specified via the --sockopts command-line option.
listen backlog
You can override the default backlog value when the daemon
listens for connections. It defaults to 5.
MODULE PARAMETERS
After the global parameters you should define a number of modules, each
module exports a directory tree as a symbolic name. Modules are
exported by specifying a module name in square brackets [module]
followed by the parameters for that module. The module name cannot
contain a slash or a closing square bracket. If the name contains
whitespace, each internal sequence of whitespace will be changed into a
single space, while leading or trailing whitespace will be discarded.
Also, the name cannot be "global" as that exact name indicates that
global parameters follow (see above).
As with GLOBAL PARAMETERS, you may use references to environment
variables in the values of parameters. See the GLOBAL PARAMETERS
section for more details.
comment
This parameter specifies a description string that is displayed
next to the module name when clients obtain a list of available
modules. The default is no comment.
path This parameter specifies the directory in the daemon's
filesystem to make available in this module. You must specify
this parameter for each module in rsyncd.conf.
You may base the path's value off of an environment variable by
surrounding the variable name with percent signs. You can even
reference a variable that is set by rsync when the user
connects. For example, this would use the authorizing user's
name in the path:
path = /home/%RSYNC_USER_NAME%
It is fine if the path includes internal spaces -- they will be
retained verbatim (which means that you shouldn't try to escape
them). If your final directory has a trailing space (and this
is somehow not something you wish to fix), append a trailing
slash to the path to avoid losing the trailing whitespace.
use chroot
If "use chroot" is true, the rsync daemon will chroot to the
"path" before starting the file transfer with the client. This
has the advantage of extra protection against possible
implementation security holes, but it has the disadvantages of
requiring super-user privileges, of not being able to follow
symbolic links that are either absolute or outside of the new
root path, and of complicating the preservation of users and
groups by name (see below).
As an additional safety feature, you can specify a dot-dir in
the module's "path" to indicate the point where the chroot
should occur. This allows rsync to run in a chroot with a
non-"/" path for the top of the transfer hierarchy. Doing this
guards against unintended library loading (since those absolute
paths will not be inside the transfer hierarchy unless you have
used an unwise pathname), and lets you setup libraries for the
chroot that are outside of the transfer. For example,
specifying "/var/rsync/./module1" will chroot to the
"/var/rsync" directory and set the inside-chroot path to
"/module1". If you had omitted the dot-dir, the chroot would
have used the whole path, and the inside-chroot path would have
been "/".
When "use chroot" is false or the inside-chroot path is not "/",
rsync will: (1) munge symlinks by default for security reasons
(see "munge symlinks" for a way to turn this off, but only if
you trust your users), (2) substitute leading slashes in
absolute paths with the module's path (so that options such as
--backup-dir, --compare-dest, etc. interpret an absolute path as
rooted in the module's "path" dir), and (3) trim ".." path
elements from args if rsync believes they would escape the
module hierarchy. The default for "use chroot" is true, and is
the safer choice (especially if the module is not read-only).
When this parameter is enabled, the "numeric-ids" option will
also default to being enabled (disabling name lookups). See
below for what a chroot needs in order for name lookups to
succeed.
If you copy library resources into the module's chroot area, you
should protect them through your OS's normal user/group or ACL
settings (to prevent the rsync module's user from being able to
change them), and then hide them from the user's view via
"exclude" (see how in the discussion of that parameter). At
that point it will be safe to enable the mapping of users and
groups by name using this "numeric ids" daemon parameter.
Note also that you are free to setup custom user/group
information in the chroot area that is different from your
normal system. For example, you could abbreviate the list of
users and groups.
numeric ids
Enabling this parameter disables the mapping of users and groups
by name for the current daemon module. This prevents the daemon
from trying to load any user/group-related files or libraries.
This enabling makes the transfer behave as if the client had
passed the --numeric-ids command-line option. By default, this
parameter is enabled for chroot modules and disabled for
non-chroot modules. Also keep in mind that uid/gid preservation
requires the module to be running as root (see "uid") or for
"fake super" to be configured.
A chroot-enabled module should not have this parameter enabled
unless you've taken steps to ensure that the module has the
necessary resources it needs to translate names, and that it is
not possible for a user to change those resources. That
includes being the code being able to call functions like
getpwuid() , getgrgid() , getpwname() , and getgrnam() ). You
should test what libraries and config files are required for
your OS and get those setup before starting to test name mapping
in rsync.
munge symlinks
This parameter tells rsync to modify all symlinks in the same
way as the (non-daemon-affecting) --munge-links command-line
option (using a method described below). This should help
protect your files from user trickery when your daemon module is
writable. The default is disabled when "use chroot" is on and
the inside-chroot path is "/", otherwise it is enabled.
If you disable this parameter on a daemon that is not read-only,
there are tricks that a user can play with uploaded symlinks to
access daemon-excluded items (if your module has any), and, if
"use chroot" is off, rsync can even be tricked into showing or
changing data that is outside the module's path (as
access-permissions allow).
The way rsync disables the use of symlinks is to prefix each one
with the string "/rsyncd-munged/". This prevents the links from
being used as long as that directory does not exist. When this
parameter is enabled, rsync will refuse to run if that path is a
directory or a symlink to a directory. When using the "munge
symlinks" parameter in a chroot area that has an inside-chroot
path of "/", you should add "/rsyncd-munged/" to the exclude
setting for the module so that a user can't try to create it.
Note: rsync makes no attempt to verify that any pre-existing
symlinks in the module's hierarchy are as safe as you want them
to be (unless, of course, it just copied in the whole
hierarchy). If you setup an rsync daemon on a new area or
locally add symlinks, you can manually protect your symlinks
from being abused by prefixing "/rsyncd-munged/" to the start of
every symlink's value. There is a perl script in the support
directory of the source code named "munge-symlinks" that can be
used to add or remove this prefix from your symlinks.
When this parameter is disabled on a writable module and "use
chroot" is off (or the inside-chroot path is not "/"), incoming
symlinks will be modified to drop a leading slash and to remove
".." path elements that rsync believes will allow a symlink to
escape the module's hierarchy. There are tricky ways to work
around this, though, so you had better trust your users if you
choose this combination of parameters.
charset
This specifies the name of the character set in which the
module's filenames are stored. If the client uses an --iconv
option, the daemon will use the value of the "charset" parameter
regardless of the character set the client actually passed.
This allows the daemon to support charset conversion in a chroot
module without extra files in the chroot area, and also ensures
that name-translation is done in a consistent manner. If the
"charset" parameter is not set, the --iconv option is refused,
just as if "iconv" had been specified via "refuse options".
If you wish to force users to always use --iconv for a
particular module, add "no-iconv" to the "refuse options"
parameter. Keep in mind that this will restrict access to your
module to very new rsync clients.
max connections
This parameter allows you to specify the maximum number of
simultaneous connections you will allow. Any clients connecting
when the maximum has been reached will receive a message telling
them to try later. The default is 0, which means no limit. A
negative value disables the module. See also the "lock file"
parameter.
log file
When the "log file" parameter is set to a non-empty string, the
rsync daemon will log messages to the indicated file rather than
using syslog. This is particularly useful on systems (such as
AIX) where syslog() doesn't work for chrooted programs. The
file is opened before chroot() is called, allowing it to be
placed outside the transfer. If this value is set on a
per-module basis instead of globally, the global log will still
contain any authorization failures or config-file error
messages.
If the daemon fails to open the specified file, it will fall
back to using syslog and output an error about the failure.
(Note that the failure to open the specified log file used to be
a fatal error.)
This setting can be overridden by using the --log-file=FILE or
--dparam=logfile=FILE command-line options. The former
overrides all the log-file parameters of the daemon and all
module settings. The latter sets the daemon's log file and the
default for all the modules, which still allows modules to
override the default setting.
syslog facility
This parameter allows you to specify the syslog facility name to
use when logging messages from the rsync daemon. You may use any
standard syslog facility name which is defined on your system.
Common names are auth, authpriv, cron, daemon, ftp, kern, lpr,
mail, news, security, syslog, user, uucp, local0, local1,
local2, local3, local4, local5, local6 and local7. The default
is daemon. This setting has no effect if the "log file" setting
is a non-empty string (either set in the per-modules settings,
or inherited from the global settings).
max verbosity
This parameter allows you to control the maximum amount of
verbose information that you'll allow the daemon to generate
(since the information goes into the log file). The default is
1, which allows the client to request one level of verbosity.
This also affects the user's ability to request higher levels of
--info and --debug logging. If the max value is 2, then no info
and/or debug value that is higher than what would be set by -vv
will be honored by the daemon in its logging. To see how high
of a verbosity level you need to accept for a particular
info/debug level, refer to "rsync --info=help" and "rsync
--debug=help". For instance, it takes max-verbosity 4 to be
able to output debug TIME2 and FLIST3.
lock file
This parameter specifies the file to use to support the "max
connections" parameter. The rsync daemon uses record locking on
this file to ensure that the max connections limit is not
exceeded for the modules sharing the lock file. The default is
/var/run/rsyncd.lock.
read only
This parameter determines whether clients will be able to upload
files or not. If "read only" is true then any attempted uploads
will fail. If "read only" is false then uploads will be possible
if file permissions on the daemon side allow them. The default
is for all modules to be read only.
Note that "auth users" can override this setting on a per-user
basis.
write only
This parameter determines whether clients will be able to
download files or not. If "write only" is true then any
attempted downloads will fail. If "write only" is false then
downloads will be possible if file permissions on the daemon
side allow them. The default is for this parameter to be
disabled.
list This parameter determines whether this module is listed when the
client asks for a listing of available modules. In addition, if
this is false, the daemon will pretend the module does not exist
when a client denied by "hosts allow" or "hosts deny" attempts
to access it. Realize that if "reverse lookup" is disabled
globally but enabled for the module, the resulting reverse
lookup to a potentially client-controlled DNS server may still
reveal to the client that it hit an existing module. The
default is for modules to be listable.
uid This parameter specifies the user name or user ID that file
transfers to and from that module should take place as when the
daemon was run as root. In combination with the "gid" parameter
this determines what file permissions are available. The default
when run by a super-user is to switch to the system's "nobody"
user. The default for a non-super-user is to not try to change
the user. See also the "gid" parameter.
The RSYNC_USER_NAME environment variable may be used to request
that rsync run as the authorizing user. For example, if you
want a rsync to run as the same user that was received for the
rsync authentication, this setup is useful:
uid = %RSYNC_USER_NAME%
gid = *
gid This parameter specifies one or more group names/IDs that will
be used when accessing the module. The first one will be the
default group, and any extra ones be set as supplemental groups.
You may also specify a "*" as the first gid in the list, which
will be replaced by all the normal groups for the transfer's
user (see "uid"). The default when run by a super-user is to
switch to your OS's "nobody" (or perhaps "nogroup") group with
no other supplementary groups. The default for a non-super-user
is to not change any group attributes (and indeed, your OS may
not allow a non-super-user to try to change their group
settings).
fake super
Setting "fake super = yes" for a module causes the daemon side
to behave as if the --fake-super command-line option had been
specified. This allows the full attributes of a file to be
stored without having to have the daemon actually running as
root.
filter The daemon has its own filter chain that determines what files
it will let the client access. This chain is not sent to the
client and is independent of any filters the client may have
specified. Files excluded by the daemon filter chain
(daemon-excluded files) are treated as non-existent if the
client tries to pull them, are skipped with an error message if
the client tries to push them (triggering exit code 23), and are
never deleted from the module. You can use daemon filters to
prevent clients from downloading or tampering with private
administrative files, such as files you may add to support
uid/gid name translations.
The daemon filter chain is built from the "filter", "include
from", "include", "exclude from", and "exclude" parameters, in
that order of priority. Anchored patterns are anchored at the
root of the module. To prevent access to an entire subtree, for
example, "/secret", you must exclude everything in the subtree;
the easiest way to do this is with a triple-star pattern like
"/secret/***".
The "filter" parameter takes a space-separated list of daemon
filter rules, though it is smart enough to know not to split a
token at an internal space in a rule (e.g. "- /foo - /bar" is
parsed as two rules). You may specify one or more merge-file
rules using the normal syntax. Only one "filter" parameter can
apply to a given module in the config file, so put all the rules
you want in a single parameter. Note that per-directory
merge-file rules do not provide as much protection as global
rules, but they can be used to make --delete work better during
a client download operation if the per-dir merge files are
included in the transfer and the client requests that they be
used.
exclude
This parameter takes a space-separated list of daemon exclude
patterns. As with the client --exclude option, patterns can be
qualified with "- " or "+ " to explicitly indicate
exclude/include. Only one "exclude" parameter can apply to a
given module. See the "filter" parameter for a description of
how excluded files affect the daemon.
include
Use an "include" to override the effects of the "exclude"
parameter. Only one "include" parameter can apply to a given
module. See the "filter" parameter for a description of how
excluded files affect the daemon.
exclude from
This parameter specifies the name of a file on the daemon that
contains daemon exclude patterns, one per line. Only one
"exclude from" parameter can apply to a given module; if you
have multiple exclude-from files, you can specify them as a
merge file in the "filter" parameter. See the "filter"
parameter for a description of how excluded files affect the
daemon.
include from
Analogue of "exclude from" for a file of daemon include
patterns. Only one "include from" parameter can apply to a
given module. See the "filter" parameter for a description of
how excluded files affect the daemon.
incoming chmod
This parameter allows you to specify a set of comma-separated
chmod strings that will affect the permissions of all incoming
files (files that are being received by the daemon). These
changes happen after all other permission calculations, and this
will even override destination-default and/or existing
permissions when the client does not specify --perms. See the
description of the --chmod rsync option and the chmod(1) manpage
for information on the format of this string.
outgoing chmod
This parameter allows you to specify a set of comma-separated
chmod strings that will affect the permissions of all outgoing
files (files that are being sent out from the daemon). These
changes happen first, making the sent permissions appear to be
different than those stored in the filesystem itself. For
instance, you could disable group write permissions on the
server while having it appear to be on to the clients. See the
description of the --chmod rsync option and the chmod(1) manpage
for information on the format of this string.
auth users
This parameter specifies a comma and/or space-separated list of
authorization rules. In its simplest form, you list the
usernames that will be allowed to connect to this module. The
usernames do not need to exist on the local system. The rules
may contain shell wildcard characters that will be matched
against the username provided by the client for authentication.
If "auth users" is set then the client will be challenged to
supply a username and password to connect to the module. A
challenge response authentication protocol is used for this
exchange. The plain text usernames and passwords are stored in
the file specified by the "secrets file" parameter. The default
is for all users to be able to connect without a password (this
is called "anonymous rsync").
In addition to username matching, you can specify groupname
matching via a '@' prefix. When using groupname matching, the
authenticating username must be a real user on the system, or it
will be assumed to be a member of no groups. For example,
specifying "@rsync" will match the authenticating user if the
named user is a member of the rsync group.
Finally, options may be specified after a colon (:). The
options allow you to "deny" a user or a group, set the access to
"ro" (read-only), or set the access to "rw" (read/write).
Setting an auth-rule-specific ro/rw setting overrides the
module's "read only" setting.
Be sure to put the rules in the order you want them to be
matched, because the checking stops at the first matching user
or group, and that is the only auth that is checked. For
example:
auth users = joe:deny @guest:deny admin:rw @rsync:ro susan joe sam
In the above rule, user joe will be denied access no matter
what. Any user that is in the group "guest" is also denied
access. The user "admin" gets access in read/write mode, but
only if the admin user is not in group "guest" (because the
admin user-matching rule would never be reached if the user is
in group "guest"). Any other user who is in group "rsync" will
get read-only access. Finally, users susan, joe, and sam get
the ro/rw setting of the module, but only if the user didn't
match an earlier group-matching rule.
See the description of the secrets file for how you can have
per-user passwords as well as per-group passwords. It also
explains how a user can authenticate using their user password
or (when applicable) a group password, depending on what rule is
being authenticated.
See also the section entitled "USING RSYNC-DAEMON FEATURES VIA A
REMOTE SHELL CONNECTION" in rsync(1) for information on how
handle an rsyncd.conf-level username that differs from the
remote-shell-level username when using a remote shell to connect
to an rsync daemon.
secrets file
This parameter specifies the name of a file that contains the
username:password and/or @groupname:password pairs used for
authenticating this module. This file is only consulted if the
"auth users" parameter is specified. The file is line-based and
contains one name:password pair per line. Any line has a hash
(#) as the very first character on the line is considered a
comment and is skipped. The passwords can contain any
characters but be warned that many operating systems limit the
length of passwords that can be typed at the client end, so you
may find that passwords longer than 8 characters don't work.
The use of group-specific lines are only relevant when the
module is being authorized using a matching "@groupname" rule.
When that happens, the user can be authorized via either their
"username:password" line or the "@groupname:password" line for
the group that triggered the authentication.
It is up to you what kind of password entries you want to
include, either users, groups, or both. The use of group rules
in "auth users" does not require that you specify a group
password if you do not want to use shared passwords.
There is no default for the "secrets file" parameter, you must
choose a name (such as /etc/rsyncd.secrets). The file must
normally not be readable by "other"; see "strict modes". If the
file is not found or is rejected, no logins for a "user auth"
module will be possible.
strict modes
This parameter determines whether or not the permissions on the
secrets file will be checked. If "strict modes" is true, then
the secrets file must not be readable by any user ID other than
the one that the rsync daemon is running under. If "strict
modes" is false, the check is not performed. The default is
true. This parameter was added to accommodate rsync running on
the Windows operating system.
hosts allow
This parameter allows you to specify a list of patterns that are
matched against a connecting clients hostname and IP address. If
none of the patterns match then the connection is rejected.
Each pattern can be in one of five forms:
o a dotted decimal IPv4 address of the form a.b.c.d, or an
IPv6 address of the form a:b:c::d:e:f. In this case the
incoming machine's IP address must match exactly.
o an address/mask in the form ipaddr/n where ipaddr is the
IP address and n is the number of one bits in the
netmask. All IP addresses which match the masked IP
address will be allowed in.
o an address/mask in the form ipaddr/maskaddr where ipaddr
is the IP address and maskaddr is the netmask in dotted
decimal notation for IPv4, or similar for IPv6, e.g.
ffff:ffff:ffff:ffff:: instead of /64. All IP addresses
which match the masked IP address will be allowed in.
o a hostname pattern using wildcards. If the hostname of
the connecting IP (as determined by a reverse lookup)
matches the wildcarded name (using the same rules as
normal unix filename matching), the client is allowed in.
This only works if "reverse lookup" is enabled (the
default).
o a hostname. A plain hostname is matched against the
reverse DNS of the connecting IP (if "reverse lookup" is
enabled), and/or the IP of the given hostname is matched
against the connecting IP (if "forward lookup" is
enabled, as it is by default). Any match will be allowed
in.
Note IPv6 link-local addresses can have a scope in the address
specification:
fe80::1%link1
fe80::%link1/64
fe80::%link1/ffff:ffff:ffff:ffff::
You can also combine "hosts allow" with a separate "hosts deny"
parameter. If both parameters are specified then the "hosts
allow" parameter is checked first and a match results in the
client being able to connect. The "hosts deny" parameter is then
checked and a match means that the host is rejected. If the host
does not match either the "hosts allow" or the "hosts deny"
patterns then it is allowed to connect.
The default is no "hosts allow" parameter, which means all hosts
can connect.
hosts deny
This parameter allows you to specify a list of patterns that are
matched against a connecting clients hostname and IP address. If
the pattern matches then the connection is rejected. See the
"hosts allow" parameter for more information.
The default is no "hosts deny" parameter, which means all hosts
can connect.
reverse lookup
Controls whether the daemon performs a reverse lookup on the
client's IP address to determine its hostname, which is used for
"hosts allow"/"hosts deny" checks and the "%h" log escape. This
is enabled by default, but you may wish to disable it to save
time if you know the lookup will not return a useful result, in
which case the daemon will use the name "UNDETERMINED" instead.
If this parameter is enabled globally (even by default), rsync
performs the lookup as soon as a client connects, so disabling
it for a module will not avoid the lookup. Thus, you probably
want to disable it globally and then enable it for modules that
need the information.
forward lookup
Controls whether the daemon performs a forward lookup on any
hostname specified in an hosts allow/deny setting. By default
this is enabled, allowing the use of an explicit hostname that
would not be returned by reverse DNS of the connecting IP.
ignore errors
This parameter tells rsyncd to ignore I/O errors on the daemon
when deciding whether to run the delete phase of the transfer.
Normally rsync skips the --delete step if any I/O errors have
occurred in order to prevent disastrous deletion due to a
temporary resource shortage or other I/O error. In some cases
this test is counter productive so you can use this parameter to
turn off this behavior.
ignore nonreadable
This tells the rsync daemon to completely ignore files that are
not readable by the user. This is useful for public archives
that may have some non-readable files among the directories, and
the sysadmin doesn't want those files to be seen at all.
transfer logging
This parameter enables per-file logging of downloads and uploads
in a format somewhat similar to that used by ftp daemons. The
daemon always logs the transfer at the end, so if a transfer is
aborted, no mention will be made in the log file.
If you want to customize the log lines, see the "log format"
parameter.
log format
This parameter allows you to specify the format used for logging
file transfers when transfer logging is enabled. The format is
a text string containing embedded single-character escape
sequences prefixed with a percent (%) character. An optional
numeric field width may also be specified between the percent
and the escape letter (e.g. "%-50n %8l %07p"). In addition, one
or more apostrophes may be specified prior to a numerical escape
to indicate that the numerical value should be made more
human-readable. The 3 supported levels are the same as for the
--human-readable command-line option, though the default is for
human-readability to be off. Each added apostrophe increases
the level (e.g. "%''l %'b %f").
The default log format is "%o %h [%a] %m (%u) %f %l", and a "%t
[%p] " is always prefixed when using the "log file" parameter.
(A perl script that will summarize this default log format is
included in the rsync source code distribution in the "support"
subdirectory: rsyncstats.)
The single-character escapes that are understood are as follows:
o %a the remote IP address (only available for a daemon)
o %b the number of bytes actually transferred
o %B the permission bits of the file (e.g. rwxrwxrwt)
o %c the total size of the block checksums received for the
basis file (only when sending)
o %C the full-file MD5 checksum if --checksum is enabled or
a file was transferred (only for protocol 30 or above).
o %f the filename (long form on sender; no trailing "/")
o %G the gid of the file (decimal) or "DEFAULT"
o %h the remote host name (only available for a daemon)
o %i an itemized list of what is being updated
o %l the length of the file in bytes
o %L the string " -> SYMLINK", " => HARDLINK", or "" (where
SYMLINK or HARDLINK is a filename)
o %m the module name
o %M the last-modified time of the file
o %n the filename (short form; trailing "/" on dir)
o %o the operation, which is "send", "recv", or "del." (the
latter includes the trailing period)
o %p the process ID of this rsync session
o %P the module path
o %t the current date time
o %u the authenticated username or an empty string
o %U the uid of the file (decimal)
For a list of what the characters mean that are output by "%i",
see the --itemize-changes option in the rsync manpage.
Note that some of the logged output changes when talking with
older rsync versions. For instance, deleted files were only
output as verbose messages prior to rsync 2.6.4.
timeout
This parameter allows you to override the clients choice for I/O
timeout for this module. Using this parameter you can ensure
that rsync won't wait on a dead client forever. The timeout is
specified in seconds. A value of zero means no timeout and is
the default. A good choice for anonymous rsync daemons may be
600 (giving a 10 minute timeout).
refuse options
This parameter allows you to specify a space-separated list of
rsync command line options that will be refused by your rsync
daemon. You may specify the full option name, its one-letter
abbreviation, or a wild-card string that matches multiple
options. For example, this would refuse --checksum (-c) and all
the various delete options:
refuse options = c delete
The reason the above refuses all delete options is that the
options imply --delete, and implied options are refused just
like explicit options. As an additional safety feature, the
refusal of "delete" also refuses remove-source-files when the
daemon is the sender; if you want the latter without the former,
instead refuse "delete-*" -- that refuses all the delete modes
without affecting --remove-source-files.
When an option is refused, the daemon prints an error message
and exits. To prevent all compression when serving files, you
can use "dont compress = *" (see below) instead of "refuse
options = compress" to avoid returning an error to a client that
requests compression.
dont compress
This parameter allows you to select filenames based on wildcard
patterns that should not be compressed when pulling files from
the daemon (no analogous parameter exists to govern the pushing
of files to a daemon). Compression is expensive in terms of CPU
usage, so it is usually good to not try to compress files that
won't compress well, such as already compressed files.
The "dont compress" parameter takes a space-separated list of
case-insensitive wildcard patterns. Any source filename matching
one of the patterns will not be compressed during transfer.
See the --skip-compress parameter in the rsync(1) manpage for
the list of file suffixes that are not compressed by default.
Specifying a value for the "dont compress" parameter changes the
default when the daemon is the sender.
pre-xfer exec, post-xfer exec
You may specify a command to be run before and/or after the
transfer. If the pre-xfer exec command fails, the transfer is
aborted before it begins. Any output from the script on stdout
(up to several KB) will be displayed to the user when aborting,
but is NOT displayed if the script returns success. Any output
from the script on stderr goes to the daemon's stderr, which is
typically discarded (though see --no-detatch option for a way to
see the stderr output, which can assist with debugging).
The following environment variables will be set, though some are
specific to the pre-xfer or the post-xfer environment:
o RSYNC_MODULE_NAME: The name of the module being accessed.
o RSYNC_MODULE_PATH: The path configured for the module.
o RSYNC_HOST_ADDR: The accessing host's IP address.
o RSYNC_HOST_NAME: The accessing host's name.
o RSYNC_USER_NAME: The accessing user's name (empty if no
user).
o RSYNC_PID: A unique number for this transfer.
o RSYNC_REQUEST: (pre-xfer only) The module/path info
specified by the user. Note that the user can specify
multiple source files, so the request can be something
like "mod/path1 mod/path2", etc.
o RSYNC_ARG#: (pre-xfer only) The pre-request arguments are
set in these numbered values. RSYNC_ARG0 is always
"rsyncd", followed by the options that were used in
RSYNC_ARG1, and so on. There will be a value of "."
indicating that the options are done and the path args
are beginning -- these contain similar information to
RSYNC_REQUEST, but with values separated and the module
name stripped off.
o RSYNC_EXIT_STATUS: (post-xfer only) the server side's
exit value. This will be 0 for a successful run, a
positive value for an error that the server generated, or
a -1 if rsync failed to exit properly. Note that an
error that occurs on the client side does not currently
get sent to the server side, so this is not the final
exit status for the whole transfer.
o RSYNC_RAW_STATUS: (post-xfer only) the raw exit value
from waitpid() .
Even though the commands can be associated with a particular
module, they are run using the permissions of the user that
started the daemon (not the module's uid/gid setting) without
any chroot restrictions.
CONFIG DIRECTIVES
There are currently two config directives available that allow a config
file to incorporate the contents of other files: &include and &merge.
Both allow a reference to either a file or a directory. They differ in
how segregated the file's contents are considered to be.
The &include directive treats each file as more distinct, with each one
inheriting the defaults of the parent file, starting the parameter
parsing as globals/defaults, and leaving the defaults unchanged for the
parsing of the rest of the parent file.
The &merge directive, on the other hand, treats the file's contents as
if it were simply inserted in place of the directive, and thus it can
set parameters in a module started in another file, can affect the
defaults for other files, etc.
When an &include or &merge directive refers to a directory, it will
read in all the *.conf or *.inc files (respectively) that are contained
inside that directory (without any recursive scanning), with the files
sorted into alpha order. So, if you have a directory named "rsyncd.d"
with the files "foo.conf", "bar.conf", and "baz.conf" inside it, this
directive:
&include /path/rsyncd.d
would be the same as this set of directives:
&include /path/rsyncd.d/bar.conf
&include /path/rsyncd.d/baz.conf
&include /path/rsyncd.d/foo.conf
except that it adjusts as files are added and removed from the
directory.
The advantage of the &include directive is that you can define one or
more modules in a separate file without worrying about unintended
side-effects between the self-contained module files.
The advantage of the &merge directive is that you can load config
snippets that can be included into multiple module definitions, and you
can also set global values that will affect connections (such as motd
file), or globals that will affect other include files.
For example, this is a useful /etc/rsyncd.conf file:
port = 873
log file = /var/log/rsync.log
pid file = /var/lock/rsync.lock
&merge /etc/rsyncd.d
&include /etc/rsyncd.d
This would merge any /etc/rsyncd.d/*.inc files (for global values that
should stay in effect), and then include any /etc/rsyncd.d/*.conf files
(defining modules without any global-value cross-talk).
AUTHENTICATION STRENGTH
The authentication protocol used in rsync is a 128 bit MD4 based
challenge response system. This is fairly weak protection, though (with
at least one brute-force hash-finding algorithm publicly available), so
if you want really top-quality security, then I recommend that you run
rsync over ssh. (Yes, a future version of rsync will switch over to a
stronger hashing method.)
Also note that the rsync daemon protocol does not currently provide any
encryption of the data that is transferred over the connection. Only
authentication is provided. Use ssh as the transport if you want
encryption.
Future versions of rsync may support SSL for better authentication and
encryption, but that is still being investigated.
EXAMPLES
A simple rsyncd.conf file that allow anonymous rsync to a ftp area at
/home/ftp would be:
[ftp]
path = /home/ftp
comment = ftp export area
A more sophisticated example would be:
uid = nobody
gid = nobody
use chroot = yes
max connections = 4
syslog facility = local5
pid file = /var/run/rsyncd.pid
[ftp]
path = /var/ftp/./pub
comment = whole ftp area (approx 6.1 GB)
[sambaftp]
path = /var/ftp/./pub/samba
comment = Samba ftp area (approx 300 MB)
[rsyncftp]
path = /var/ftp/./pub/rsync
comment = rsync ftp area (approx 6 MB)
[sambawww]
path = /public_html/samba
comment = Samba WWW pages (approx 240 MB)
[cvs]
path = /data/cvs
comment = CVS repository (requires authentication)
auth users = tridge, susan
secrets file = /etc/rsyncd.secrets
The /etc/rsyncd.secrets file would look something like this:
tridge:mypass
susan:herpass
FILES
/etc/rsyncd.conf or rsyncd.conf
SEE ALSO
rsync(1)
DIAGNOSTICS
BUGS
Please report bugs! The rsync bug tracking system is online at
http://rsync.samba.org/
VERSION
This man page is current for version 3.1.2 of rsync.
CREDITS
rsync is distributed under the GNU General Public License. See the
file COPYING for details.
The primary ftp site for rsync is ftp://rsync.samba.org/pub/rsync.
A WEB site is available at http://rsync.samba.org/
We would be delighted to hear from you if you like this program.
This program uses the zlib compression library written by Jean-loup
Gailly and Mark Adler.
THANKS
Thanks to Warren Stanley for his original idea and patch for the rsync
daemon. Thanks to Karsten Thygesen for his many suggestions and
documentation!
AUTHOR
rsync was written by Andrew Tridgell and Paul Mackerras. Many people
have later contributed to it.
Mailing lists for support and development are available at
http://lists.samba.org
21 Dec 2015 rsyncd.conf(5)
Free and Open Source Software